Customer Reviews

800-562-6006
M-F 8am to 5pm PST

Community CLS-V2-6W Two-Way Loudspeaker System

Community compact full-range two-way speaker system with 6.5 woofer

Community logo

What's in the box:

  • Community V2-6B Loudspeaker
  • Yoke-style mounting bracket with optional 10° and 20°standoffs that allow a 10°or 20° downward or upward vertical tilt
  • Installation Guide

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price

Availability
Call for Price
Usually Ships
1 to 2 Days
Item Number 
CLS-V2-6W
Vendor Part

with constant-directivity rotatable horns

    The V2-6W Community Loudspeaker (White) is a two-way, full-range system suitable for use in a wide variety of fixed installations, including distributed systems such as those found in restaurants and airports. When paired with a compatible subwoofer, system will produce high-fidelity, broad spectrum sound and is a good choice for ancillary delay applications. Delay loudspeakers even-out differences in sound pressure levels from front to rear of room when used to augment FOH systems in mid to large size venues.

    Units can be positioned for under-balcony fill, over-balcony fill, or placed toward rear of seating areas for greater control over relative levels and relative tonal response when commissioning and equalizing installation. Can be mounted to wall or ceiling surfaces using included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. Constant-directivity rotatable horns allow loudspeakers to mount horizontally for under-balcony and low ceiling applications.

    Features

  • DYNA-TECH™ driver protection circuitry
  • Ferrofluid-treated HF driver for improved heat dissipation
  • Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
  • Rotatable square horn
  • Terminal strip & NL4-compatible connectors
  • Available in standard black or white finishes
  • Mounting yoke included with 10° & 20° vertical standoffs
  • Optional V2-6T autoformer model for 70V/100V applications

Specifications for the Community CLS-V2-6W

{ "Loudspeaker Type" : "Compact two-way, full-range, trapezoidal, vented bass, user rotatable horn", "Operating Range" : "90 Hz to 18 kHz (-10 dB)", "Frequency Response" : "110 Hz to 16 kHz (±3 dB)", "Max Input Ratings:" : [ "100W continuous, 250W program", "28.3 volts RMS, 56.6 volts momentary peak" ], "Sensitivity (1W/1m)" : "92 dB (100 Hz to 12.5 kHz) free space", "Maximum Output" : "112 dB SPL / 118 dB SPL (peak)", "Nominal Impedance" : "8 ohms", "Minimum Impedance" : "6 ohms @ 200 Hz", "Nominal –6dB Beamwidth" : "90° H x 70° V (in vertical position)", "Crossover Frequency" : "1.3 kHz", "Recommended Signal Processing" : "100 Hz, 24 dB/octave Butterworth high pass filter", "Drivers:" : { "LF" : "1x 6.5" cone", "HF" : "1x 1"" }, "Driver Protection" : "DYNA-TECH protection circuitry", "Input Connection" : "NL4-compatible locking connector with terminal strip in parallel", "Controls" : "None", "Enclosure" : "Trapezoidal (22.5° included angle) 18mm, 11-ply cross-laminated birch", "Mounting/Rigging Provisions:" : [ "9x M6 threaded rigging fittings", "4x M6 threaded fittings for V-HSS and third-party suspension products" ], "Finish" : "Catalyzed polyester two-part paint", "Grille" : "Powder-coated steel", "Required Accessories" : "None", "Supplied Accessories" : "Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt", "Optional Accessories:" : [ "CMKIT ceiling mount kit", "V-HSS handle and stand socket", "VB-TILT tilting bracket", "VB-VY6 vertical yoke bracket", "M6EYBLTKIT 6mm eyebolt kit" ], "Dimensions" : "15.5" H x 9.8" W x 10.1" D (395 x 249 x 258 mm)" }